Specification desk 规格确认
Separate catalog-backed facts from fields that still require written confirmation, especially the unit basis behind the printed weight labels.
把目录已证实的信息与仍需书面确认的字段分开，尤其要确认克重标注所采用的单位口径。
Verified catalog facts 已核实目录事实
Every page in this first SEO phase follows the same factual boundary.
本次第一阶段 SEO 的所有页面均遵守同一事实边界。
These values are printed in the supplied catalog. The catalog does not state the unit basis, so the basis must be confirmed in the quotation rather than interpreted as g/m².
以上数值来自现有目录。目录未说明单位口径，因此必须在报价单中确认，不能自行理解为 g/m²。
0.4 × 200 m · 0.5 × 200 m · 0.6 × 200 m · 0.8 × 200 m · 1 × 200 m · 1.2 × 200 m · 1.5 × 200 m · 1.8 × 200 m · 2 × 100 m · 2.5 × 100 m · 3 × 100 m · 4 × 100 m
0.4 × 200 m · 0.5 × 200 m · 0.6 × 200 m · 0.8 × 200 m · 1 × 200 m · 1.2 × 200 m · 1.5 × 200 m · 1.8 × 200 m · 2 × 100 m · 2.5 × 100 m · 3 × 100 m · 4 × 100 m
Water and air permeability, weed suppression, wear-resistant material and cut-to-lay handling are shown in the supplied catalog.
现有目录列明透水透气、抑草防杂草、耐磨材质以及可裁剪铺设。
Specification desk 规格确认
Use the same field names across supplier inquiries so differences are visible instead of hidden in general product descriptions.
向不同供应商询价时使用相同字段，避免差异被笼统的产品描述掩盖。
Record the product as woven weed-control fabric and attach the reference image or link.
记录产品为编织除草布，并附参考图片或链接。
Record the printed 70 g, 80 g or 90 g reference and leave a separate field for the confirmed unit basis.
记录目录中的 70 g、80 g 或 90 g，并单独设置单位口径确认栏。
Choose one listed size or mark a different requested dimension as subject to confirmation.
选择一种目录尺寸；如需其他尺寸，应标记为待确认需求。
List permeability, weed suppression, wear resistance and cuttable handling without adding unsupported figures.
可列出透水透气、抑草、耐磨和可裁剪，但不要补充无依据的数值。
Buyer workflow 买家流程
The catalog provides a starting reference. The quotation should close every remaining gap.
目录提供起始参考，报价单应补齐所有待确认信息。
Do not convert the printed g values into another unit without supplier confirmation.
未经供应商确认，不要把目录 g 数值换算成其他单位。
Repeat width and length together on the quotation and purchase record.
在报价单和采购记录中同时写明宽度与长度。
Record roll count, any unit packing request, labeling request and outer packing in one scope.
统一记录卷数、单件包装、标签和外包装需求。
Link the written specification to the exact product reference being discussed.
把书面规格与正在沟通的准确产品参考关联起来。
Questions to resolve 需确认的问题
These answers distinguish catalog evidence from order-specific confirmation.
以下回答区分目录依据与订单专属确认。
Write the printed value and add “unit basis to be confirmed” until the quotation supplies that basis.
先写目录数值并注明“单位口径待确认”，直至报价单提供明确口径。
No availability promise is made here. Use the list as a catalog reference and confirm the offered size and quantity.
本站不作现货承诺；该清单仅作目录参考，实际尺寸与数量需确认。
Only add figures supported by the supplier’s written specification for the exact offered product.
只有在供应商针对实际供货产品提供书面依据时，才应加入性能数值。
Direct factory inquiry 工厂直联询盘
Include product reference, width × length, printed weight-label reference, quantity, packing request and destination. The exact offered specification remains subject to quotation confirmation.
请提供产品参考、宽度 × 长度、目录克重标注、数量、包装需求和目的地；实际供货规格以报价单确认为准。
With your permission, we use Google Analytics 4 to understand website use. It is not loaded before you accept, and inquiry fields, email addresses and phone numbers are never sent to analytics.
经您同意后，我们才使用 Google Analytics 4 了解网站访问情况；同意前不会加载，也不会向统计服务发送询盘字段、邮箱或电话。 Privacy / 隐私政策