Application planning 应用规划
Start with the ground layout and installation requirements. Product characteristics should be checked against that brief, not treated as a universal result.
先明确地面布局与铺设要求，再把产品特点与需求逐项核对，而不是把特点理解为通用效果承诺。
Verified catalog facts 已核实目录事实
Every page in this first SEO phase follows the same factual boundary.
本次第一阶段 SEO 的所有页面均遵守同一事实边界。
These values are printed in the supplied catalog. The catalog does not state the unit basis, so the basis must be confirmed in the quotation rather than interpreted as g/m².
以上数值来自现有目录。目录未说明单位口径，因此必须在报价单中确认，不能自行理解为 g/m²。
0.4 × 200 m · 0.5 × 200 m · 0.6 × 200 m · 0.8 × 200 m · 1 × 200 m · 1.2 × 200 m · 1.5 × 200 m · 1.8 × 200 m · 2 × 100 m · 2.5 × 100 m · 3 × 100 m · 4 × 100 m
0.4 × 200 m · 0.5 × 200 m · 0.6 × 200 m · 0.8 × 200 m · 1 × 200 m · 1.2 × 200 m · 1.5 × 200 m · 1.8 × 200 m · 2 × 100 m · 2.5 × 100 m · 3 × 100 m · 4 × 100 m
Water and air permeability, weed suppression, wear-resistant material and cut-to-lay handling are shown in the supplied catalog.
现有目录列明透水透气、抑草防杂草、耐磨材质以及可裁剪铺设。
Application planning 应用规划
A measured site plan makes width, length, cutting and quantity decisions reviewable.
经过测量的场地方案，可让宽度、长度、裁剪和数量决策更易核对。
Provide overall area, row or bed spacing, covered strips and uncovered openings.
提供总面积、行距或苗床间距、覆盖带与预留开口。
The catalog lists water and air permeability; state how the fabric will sit within the actual site plan.
目录列明透水透气；仍需说明除草布在实际场地中的铺设方式。
Record the intended weed-control use without assuming a universal duration or percentage.
记录抑草用途，但不要预设统一的持续时间或百分比。
Use the cuttable characteristic to plan pieces, joins and openings before calculating quantity.
根据可裁剪特点规划裁片、接缝与开口，再计算数量。
Buyer workflow 买家流程
Keep assumptions out of the request by attaching measurements and clearly marking every item that still needs confirmation.
通过附上测量数据并标明待确认项，避免把假设写进采购需求。
Mark edges, planting openings, paths, joins and any obstacles.
标出边界、种植开口、通道、接缝和障碍物。
Compare the site strips with the published size list to reduce unnecessary cutting.
用场地条带宽度匹配目录尺寸，以减少不必要裁剪。
Use both width and length, then account for the buyer’s planned joins and openings.
同时按宽度和长度计算，并计入买家计划的接缝与开口。
Ask the supplier to confirm the exact offered size, weight-label basis, quantity and packing.
要求供应商确认实际尺寸、克重标注口径、数量和包装。
Questions to resolve 需确认的问题
These answers distinguish catalog evidence from order-specific confirmation.
以下回答区分目录依据与订单专属确认。
No. The catalog characteristic does not replace a review of the ground, irrigation arrangement or installation plan.
不能。目录特点不能替代对地面、灌溉安排和铺设方案的核对。
Measure the covered strips, compare them with the listed widths and include the intended cutting and joining method.
测量覆盖条带，匹配目录卷宽，并说明计划的裁剪与接缝方式。
No universal field result is claimed. Confirm the offered product and evaluate it for the specific project.
本站不承诺通用现场效果；应确认实际供货产品并针对具体项目评估。
Direct factory inquiry 工厂直联询盘
Include product reference, width × length, printed weight-label reference, quantity, packing request and destination. The exact offered specification remains subject to quotation confirmation.
请提供产品参考、宽度 × 长度、目录克重标注、数量、包装需求和目的地；实际供货规格以报价单确认为准。
With your permission, we use Google Analytics 4 to understand website use. It is not loaded before you accept, and inquiry fields, email addresses and phone numbers are never sent to analytics.
经您同意后，我们才使用 Google Analytics 4 了解网站访问情况；同意前不会加载，也不会向统计服务发送询盘字段、邮箱或电话。 Privacy / 隐私政策